• In diretta da GamesVillage.it
    • News
    • -
    • In Evidenza
    • -
    • Recensioni
    • -
    • RetroGaming
    • -
    • Anteprime
    • -
    • Video
    • -
    • Cinema

Pag 1 di 2 12 UltimoUltimo
Visualizzazione risultati da 1 a 15 di 16

Discussione: Problema MONITOR

Cambio titolo
  1. #1
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088

    Sonno Problema MONITOR

    Finalmente sono riuscito ad abilitare il 3D sulla mia ATI.

    Per settare la ATI ho dovuto prima installare il "Kernel-Source" rpm che sta nel terzo cd di installazione in questo modo potevo fare il famoso "./make.sh" che prima mi dava sempre errore.
    Come secondo ostacolo ho dovuto "imparare" come si acquisiscono diritti di lettura/scrittura su file dato che il "make.sh" mi dava "permesso negato" nonostante fossi già su "#".
    Finalmente potevo fare il fglrxconfig.

    Dopo aver dato tutte le indicazioni mi trovo a dover fornire le impostazioni di refresh del monitor.
    Sono stato un po' sul sicuro con le risoluzioni.
    In pratica adesso mi ritrovo con il Linux che mi parte in 640X480.
    Fortunatamente "glxinfo | grep rendering" mi da conferma che la scheda video e' installata correttamente.
    Ma se provo a cambiare le impostazioni del monitor,non mi si riavvia più in modalità grafica.!

    Utilizzando l'interfaccia grafica (da buon utonto di Linux8( ) riesco a provare nuovi settaggi del monitor.
    Mi fa fare il TEST prima di riavviare.
    In personalizzato non mi va (con nessuna combinazione).
    In predefinito non mi va (con nessuna combinazione).
    Prima era configurato come "plug 'n play" ma adesso non so perche' non mi fa più selezionare l'opzione.

    Il mio monitor è un CRT Samsung SyncMaster 753s

    Come posso fare...HELPPPP !!!
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  2. #2
    Utente GNU/Linux
    Registrato il
    10-02
    Località
    Roma
    Messaggi
    3.246
    # cat /etc/X11/XF86Config-4
    Che dice?
    (magari anche # cat /var/log/XFree86.0.log )
    (possibilmente linkando gli output, per la salvezza delle nostre rotelline )

  3. #3
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Nonno Cicala

    # cat /etc/X11/XF86Config-4
    Che dice?
    (magari anche # cat /var/log/XFree86.0.log )
    (possibilmente linkando gli output, per la salvezza delle nostre rotelline )
    Ma che cakkio c'ha sto forum, sono nei pasticci e si mette a fare gli scherzi!!

    Grazie Nonno!
    Adesso purtroppo non sono a casa e non posso provare.
    Appena vado a casa, se il forum me lo permette, faccio sapere che mi scrive
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  4. #4
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    [[email protected] moreno]# cat /etc/X11/XF86Config-4
    # File: XF86Config-4
    # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

    # ********************************************************** ************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # ********************************************************** ************

    # ********************************************************** ************
    # DRI Section
    # ********************************************************** ************
    Section "dri"
    # Access to OpenGL ICD is allowed for all users:
    Mode 0666
    # Access to OpenGL ICD is restricted to a specific user group:
    # Group 100 # users
    # Mode 0660
    EndSection

    # ********************************************************** ************
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # ********************************************************** ************
    #
    Section "Module"

    # This loads the DBE extension module.

    Load "dbe" # Double buffer extension

    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    # Option "omit xfree86-dga"
    EndSubSection

    # This loads the Type1 and FreeType font modules
    Load "type1"
    Load "freetype"

    # This loads the GLX module
    Load "glx" # libglx.a
    Load "dri" # libdri.a

    EndSection

    # ********************************************************** ************
    # Files section. This allows default font and rgb paths to be set
    # ********************************************************** ************

    Section "Files"

    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.

    RgbPath "/usr/X11R6/lib/X11/rgb"

    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #

    # FontPath "/usr/X11R6/lib/X11/fonts/local/"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

    # The module search path. The default path is shown here.

    # ModulePath "/usr/X11R6/lib/modules"

    EndSection

    # ********************************************************** ************
    # Server flags section.
    # ********************************************************** ************

    Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging

    # Option "NoTrapSignals"

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.

    # Option "DontZap"

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.

    # Option "Dont Zoom"

    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.

    # Option "DisableVidModeExtension"

    # Uncomment this to enable the use of a non-local xvidtune client.

    # Option "AllowNonLocalXvidtune"

    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.

    # Option "DisableModInDev"

    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).

    # Option "AllowNonLocalModInDev"

    EndSection

    # ********************************************************** ************
    # Input devices
    # ********************************************************** ************

    # ********************************************************** ************
    # Core keyboard's InputDevice section
    # ********************************************************** ************

    Section "InputDevice"

    Identifier "Keyboard1"
    Driver "Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.

    # Option "Protocol" "Xqueue"

    Option "AutoRepeat" "500 30"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"

    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"

    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"

    # These are the default XKB settings for XFree86
    # Option "XkbRules" "xfree86"
    # Option "XkbModel" "pc101"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""

    # Option "XkbDisable"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc101"
    Option "XkbLayout" "it"

    EndSection


    # ********************************************************** ************
    # Core Pointer's InputDevice section
    # ********************************************************** ************

    Section "InputDevice"

    # Identifier and driver

    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ImPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Device" "/dev/mouse"

    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.

    # Option "Protocol" "Xqueue"

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.

    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"

    # ChordMiddle is an option for some 3-button Logitech mice

    # Option "ChordMiddle"

    EndSection


    # ********************************************************** ************
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the XF86Config man page for a description of the options.
    # ********************************************************** ************
    #
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection

    # ********************************************************** ************
    # Monitor section
    # ********************************************************** ************

    # Any number of monitor sections may be present

    Section "Monitor"
    Identifier "Monitor0"
    HorizSync 31.5 - 68.7
    VertRefresh 60 - 75
    Option "DPMS"

    # === mode lines based on GTF ===
    # VGA @ 100Hz
    # Modeline "[email protected]" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
    # SVGA @ 100Hz
    # Modeline "[email protected]" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
    # XVGA @ 100Hz
    # Modeline "[email protected]" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
    # 1152x864 @ 60Hz
    # Modeline "[email protected]" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
    # 1152x864 @ 85Hz
    # Modeline "[email protected]" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
    # 1152x864 @ 100Hz
    # Modeline "[email protected]" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
    # 1280x960 @ 75Hz
    # Modeline "[email protected]" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
    # 1280x960 @ 100Hz
    # Modeline "[email protected]" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
    # SXGA @ 100Hz
    # Modeline "1280x[email protected]" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
    # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
    # Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
    # 1600x1000 @ 60Hz
    # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
    # 1600x1000 @ 75Hz
    # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
    # 1600x1000 @ 85Hz
    # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
    # 1600x1000 @ 100Hz
    # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
    # 1600x1024 @ 60Hz
    # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
    # 1600x1024 @ 75Hz
    # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
    # 1600x1024 @ 76Hz
    # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
    # 1600x1024 @ 85Hz
    # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
    # 1920x1080 @ 60Hz
    # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
    # 1920x1080 @ 75Hz
    # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
    # 1920x1200 @ 60Hz
    # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
    # 1920x1200 @ 75Hz
    # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 1400x1050 @ 60Hz M9 Laptop mode
    # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
    # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "[email protected]" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
    # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "[email protected]" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

    EndSection


    # ********************************************************** ************
    # Graphics device section
    # ********************************************************** ************

    # Any number of graphics device sections may be present

    # Standard VGA Device:

    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"

    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.

    # Chipset "generic"

    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.

    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # installed.

    # BusID "PCI:0:10:0"

    # VideoRam 256

    # Clocks 25.2 28.3

    EndSection

    # === ATI device section ===

    Section "Device"
    Identifier "ATI Graphics Adapter"
    Driver "fglrx"
    # ### generic DRI settings ###
    # === disable PnP Monitor ===
    #Option "NoDDC"
    # === disable/enable XAA/DRI ===
    Option "no_accel" "no"
    Option "no_dri" "no"
    # === misc DRI settings ===
    Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
    # ### FireGL DDX driver module specific settings ###
    # === Screen Management ===
    Option "DesktopSetup" "0x00000000"
    Option "MonitorLayout" "AUTO, AUTO"
    Option "IgnoreEDID" "off"
    Option "HSync2" "unspecified"
    Option "VRefresh2" "unspecified"
    Option "ScreenOverlap" "0"
    # === TV-out Management ===
    Option "NoTV" "yes"
    Option "TVStandard" "NTSC-M"
    Option "TVHSizeAdj" "0"
    Option "TVVSizeAdj" "0"
    Option "TVHPosAdj" "0"
    Option "TVVPosAdj" "0"
    Option "TVHStartAdj" "0"
    Option "TVColorAdj" "0"
    Option "GammaCorrectionI" "0x00000000"
    Option "GammaCorrectionII" "0x00000000"
    # === OpenGL specific profiles/settings ===
    Option "Capabilities" "0x00000000"
    # === Video Overlay for the Xv extension ===
    Option "VideoOverlay" "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    # will be disabled automatically
    Option "OpenGLOverlay" "off"
    # === Center Mode (Laptops only) ===
    Option "CenterMode" "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals" "off"
    # === QBS Management ===
    Option "Stereo" "off"
    Option "StereoSyncEnable" "1"
    # === FSAA Management ===
    Option "FSAAEnable" "no"
    Option "FSAAScale" "2"
    Option "FSAADisableGamma" "no"
    Option "FSAACustomizeMSPos" "no"
    Option "FSAAMSPosX0" "0.000000"
    Option "FSAAMSPosY0" "0.000000"
    Option "FSAAMSPosX1" "0.000000"
    Option "FSAAMSPosY1" "0.000000"
    Option "FSAAMSPosX2" "0.000000"
    Option "FSAAMSPosY2" "0.000000"
    Option "FSAAMSPosX3" "0.000000"
    Option "FSAAMSPosY3" "0.000000"
    Option "FSAAMSPosX4" "0.000000"
    Option "FSAAMSPosY4" "0.000000"
    Option "FSAAMSPosX5" "0.000000"
    Option "FSAAMSPosY5" "0.000000"
    # === Misc Options ===
    Option "UseFastTLS" "0"
    Option "BlockSignalsOnLock" "on"
    Option "UseInternalAGPGART" "no"
    Option "ForceGenericCPU" "no"
    BusID "PCI:1:0:0" # vendor=1002, device=4152
    Screen 0
    EndSection

    # ********************************************************** ************
    # Screen sections
    # ********************************************************** ************

    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen0"
    Device "ATI Graphics Adapter"
    Monitor "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
    Depth 24
    Modes "640x480"
    ViewPort 0 0 # initial origin if mode is smaller than desktop
    # Virtual 1280 1024
    EndSubsection
    EndSection

    # ********************************************************** ************
    # ServerLayout sections.
    # ********************************************************** ************

    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.

    Section "ServerLayout"

    # The Identifier line must be present
    Identifier "Server Layout"

    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.

    Screen "Screen0"

    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

    EndSection

    ### EOF ###
    [[email protected] moreno]#
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  5. #5
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    [[email protected] moreno]# cat /var/log/XFree86.0.log


    XFree86 Version 4.3.0.1
    Release Date: 15 August 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.6.0-1mdkenterprise i686 [ELF]
    Build Date: 01 March 2004
    Before reporting problems, check http://www.XFree86.Org/
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 8 20:49:28 2004
    (==) Using config file: "/etc/X11/XF86Config-4"
    (==) ServerLayout "Server Layout"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "ATI Graphics Adapter"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc101"
    (**) XKB: model: "pc101"
    (**) Option "XkbLayout" "it"
    (**) XKB: layout: "it"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    Using vt 7
    (--) using VT number 7

    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    XFree86 ANSI C Emulation: 0.2
    XFree86 Video Driver: 0.6
    XFree86 XInput driver : 0.4
    XFree86 Server Extension : 0.2
    XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x8000582c, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    x100) IX[B]
    (--) PCI(1:0:0) ATI Technologies Inc unknown chipset (0x4152) rev 0, Mem @ 0xc0000000/28, 0xe5000000/16, I/O @ 0x9000/8
    (--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x4172) rev 0, Mem (II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    Module class: XFree86 Server Extension
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
    (II) Module freetype: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 2.0.2
    Module class: XFree86 Font Renderer
    ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    (II) Module GLcore: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
    (II) Module dri: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
    (II) Module drm: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
    (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
    compiled for 4.3.0.1, module version = 3.7.6
    Module class: XFree86 Video Driver
    ABI class: XFree86 Video Driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    Module class: XFree86 XInput Driver
    ABI class: XFree86 XInput driver, version 0.4
    (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
    ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
    ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
    ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
    ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
    ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
    ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
    ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
    ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
    ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
    ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
    ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
    ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
    ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
    ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
    ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
    ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
    ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10)
    (II) Primary Device is: PCI 01:00:0
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset ATI RV350 AR (R9600 PRO) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    (II) fglrx(0): pEnt->device->identifier=0x820a5c0
    (II) resource ranges after probing:
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [R200PreInit] === begin, [s]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "NoAccel" "no"
    (**) fglrx(0): Option "NoDRI" "no"
    (**) fglrx(0): Option "Capabilities" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
    (**) fglrx(0): Option "OpenGLOverlay" "off"
    (**) fglrx(0): Option "VideoOverlay" "on"
    (**) fglrx(0): Option "DesktopSetup" "0x00000000"
    (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
    (**) fglrx(0): Option "HSync2" "unspecified"
    (**) fglrx(0): Option "VRefresh2" "unspecified"
    (**) fglrx(0): Option "ScreenOverlap" "0"
    (**) fglrx(0): Option "IgnoreEDID" "off"
    (**) fglrx(0): Option "UseInternalAGPGART" "no"
    (**) fglrx(0): Option "Stereo" "off"
    (**) fglrx(0): Option "StereoSyncEnable" "1"
    (**) fglrx(0): Option "UseFastTLS" "0"
    (**) fglrx(0): Option "BlockSignalsOnLock" "on"
    (**) fglrx(0): Option "ForceGenericCPU" "no"
    (**) fglrx(0): Option "CenterMode" "off"
    (**) fglrx(0): Option "FSAAScale" "2"
    (**) fglrx(0): Option "FSAAEnable" "no"
    (**) fglrx(0): Option "FSAADisableGamma" "no"
    (**) fglrx(0): Option "FSAACustomizeMSPos" "no"
    (**) fglrx(0): Option "NoTV" "yes"
    (**) fglrx(0): Option "TVStandard" "NTSC-M"
    (**) fglrx(0): Option "TVHSizeAdj" "0"
    (**) fglrx(0): Option "TVVSizeAdj" "0"
    (**) fglrx(0): Option "TVHPosAdj" "0"
    (**) fglrx(0): Option "TVVPosAdj" "0"
    (**) fglrx(0): Option "TVHStartAdj" "0"
    (**) fglrx(0): Option "TVColorAdj" "0"
    (**) fglrx(0): Option "PseudoColorVisuals" "off"
    (**) fglrx(0): Qbs disabled
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x00000000
    (**) fglrx(0): Gamma Correction for II is 0x00000000
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): initializing int10
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (**) fglrx(0): Option "mtrr" "off"
    (--) fglrx(0): Chipset: "ATI RV350 AR (R9600 PRO)" (Chipset = 0x4152)
    (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x7c19)
    (--) fglrx(0): board vendor info: third party grafics adapter - NOT original ATI
    (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
    (--) fglrx(0): MMIO registers at 0xe5000000
    (--) fglrx(0): ChipExtRevID = 0x00
    (--) fglrx(0): ChipIntRevID = 0x0C
    (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
    (WW) fglrx(0): board is an unknown third party board, chipset is supported
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.2.0
    ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): I2C bus "DDC" initialized.
    (II) fglrx(0): Connector Layout from BIOS --------
    (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
    (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
    (**) fglrx(0): MonitorLayout Option:
    Monitor1--Type AUTO, Monitor2--Type AUTO
    (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
    (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
    (II) fglrx(0): Primary head:
    Monitor -- NONE
    Connector -- DVI-I
    DAC Type -- TVDAC/ExtDAC
    TMDS Type -- Internal
    DDC Type -- DVI_DDC
    (II) fglrx(0): Secondary head:
    Monitor -- CRT
    Connector -- VGA
    DAC Type -- Primary
    TMDS Type -- NONE
    DDC Type -- VGA_DDC
    (II) fglrx(0): EDID data from the display on Secondary head ---------------------------
    (II) fglrx(0): Manufacturer: SAM Model: 27 Serial#: 1095643447
    (II) fglrx(0): Year: 2003 Week: 34
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) fglrx(0): Sync: Separate
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
    (II) fglrx(0): Gamma: 2.07
    (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600
    (II) fglrx(0): blueX: 0.142 blueY: 0.057 whiteX: 0.283 whiteY: 0.298
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): [email protected]
    (II) fglrx(0): [email protected]
    (II) fglrx(0): [email protected]
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
    (II) fglrx(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) fglrx(0): #2: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 85 vid: 22881
    (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 94.5 MHz Image Size: 312 x 234 mm
    (II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
    (II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
    (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 110 MHz
    (II) fglrx(0): Monitor name: SyncMaster
    (II) fglrx(0): Serial No: HJEW816821
    (II) fglrx(0):
    (II) fglrx(0): DesktopSetup 0x0000
    (**) fglrx(0): PseudoColor visuals disabled
    (**) fglrx(0): Overlay disabled
    (**) fglrx(0): Overlay disabled
    (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=32500
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total 1 valid mode(s) found.
    (--) fglrx(0): Virtual size is 640x480 (pitch 640)
    (**) fglrx(0): *Default mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
    (II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
    (--) fglrx(0): Display dimensions: (320, 240) mm
    (--) fglrx(0): DPI set to (50, 50)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.0.0
    ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 0.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (**) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="The XFree86 Project"
    compiled for 4.3.0.1, module version = 1.1.0
    ABI class: XFree86 Video Driver, version 0.6
    (==) fglrx(0): HPV inactive
    (==) fglrx(0): FSAA enabled: NO
    (**) fglrx(0): FSAA Gamma enabled
    (**) fglrx(0): FSAA Multisample Position is fix
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
    (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
    compiled for 4.3.0.1, module version = 3.7.6
    ABI class: XFree86 Server Extension, version 0.2
    (II) fglrx(0): Depth moves disabled by default
    (**) fglrx(0): Capabilities: 0x00000000
    (**) fglrx(0): cpuFlags: 0x8000000d
    (**) fglrx(0): cpuSpeedMHz: 0x00000348
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): using built in AGPGART module: no
    (**) fglrx(0): UseFastTLS=0
    (**) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) fglrx(0): UMM area: 0xc032c000 (size=0x07cd4000)
    (II) fglrx(0): driver needs XFree86 version: 4.3.x
    (II) fglrx(0): detected XFree86 version: 4.3.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    (II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xe8a69000
    (II) fglrx(0): [drm] mapped SAREA 0xe8a69000 to 0x40255000
    (II) fglrx(0): [drm] framebuffer handle = 0xc0000000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 3.7.6
    (II) fglrx(0): Date: Mar 5 2004
    (II) fglrx(0): Desc: ATI Fire GL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.3-4mdksmp
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0xe5000000
    (II) fglrx(0): [agp] Mode=0x1f000207 bridge: 0x1106/0x0691
    (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
    (II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
    (II) fglrx(0): [agp] enabling AGP with mode=0x1f000304
    (II) fglrx(0): [agp] AGP protocoll is enabled for grafics board. (cmd=0x1f000304)
    (II) fglrx(0): [agp] grafics chipset has AGP v2.0
    (II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
    (II) fglrx(0): [drm] texture shared area handle = 0xf0d82000
    (II) fglrx(0): shared FSAAScale=1
    (II) fglrx(0): DRI initialization successfull!
    (==) fglrx(0): Backing store disabled
    (==) fglrx(0): Silken mouse enabled
    (II) fglrx(0): Using hardware cursor (scanline 480)
    (II) fglrx(0): Largest offscreen area available: 640 x 811
    (**) Option "dpms"
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Offscreen Pixmaps
    Setting up tile and stipple cache:
    30 128x128 slots
    (II) fglrx(0): Acceleration enabled
    (II) fglrx(0): X context handle = 0x00000001
    (II) fglrx(0): [DRI] installation complete
    (II) fglrx(0): Direct rendering enabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (**) Option "Protocol" "ImPS/2"
    (**) Mouse1: Protocol: "ImPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/mouse"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 5
    (II) Keyboard "Keyboard1" handled by legacy driver
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
    SetClientVersion: 0 7
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  6. #6
    Utente GNU/Linux
    Registrato il
    10-02
    Località
    Roma
    Messaggi
    3.246
    In /etc/X11/XF86Config-4 prova a cambiare questo:
    Subsection "Display"
    Depth 24
    Modes "640x480"
    ViewPort 0 0 # initial origin if mode is smaller than desktop
    # Virtual 1280 1024
    EndSubsection
    EndSection
    in questo:
    Subsection "Display"
    Depth 24
    Modes "640x480" "800x600" "1024x768"
    ViewPort 0 0 # initial origin if mode is smaller than desktop
    # Virtual 1280 1024
    EndSubsection
    EndSection
    Se vuoi utilizzare una risoluzione superiore, per esempio 1280x960, e la tua scheda supporta anche il 1152x864, dovresti aggiungerle in ordine crescente dopo il 1024x768, come ho fatto con quest'ultimo

  7. #7
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Nonno Cicala

    In /etc/X11/XF86Config-4 prova a cambiare questo:in questo:Se vuoi utilizzare una risoluzione superiore, per esempio 1280x960, e la tua scheda supporta anche il 1152x864, dovresti aggiungerle in ordine crescente dopo il 1024x768, come ho fatto con quest'ultimo
    ( ( ...come faccio a modificarlo??

    Devo fare un setup?!?

    Io purtroppo non sono affatto pratico , e sto imparando qualcosa solo adesso.
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  8. #8
    Utente L'avatar di Phoenix
    Registrato il
    10-02
    Località
    Midwich Street
    Messaggi
    6.699
    Fai il login di root e lo apri con un semplice editor di file di testo, ci aggiungi quelle due paroli, lo salvi e riavvii |)


    He who is not bold enough to be stared at from across the abyss
    is not bold enough to stare into it himself.

  9. #9
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Problema monitor RISOLTO !!!!

    Grazie ragazzi!!!!

    L'unica cosa è che se faccio (tramite X) "Configura il tuo computer" mi da come risoluzione corrente "640x480" e invece sono a 1024x768...boh.

    A parte questo dettaglio va benissimo ))

    Domandina:
    Perche' quando avvio mi da "Attivo l'interfaccia Eth0 .......[FALLITO]" ??
    Posso far qualcosa per farla diventare [OK] come tutto il resto??
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  10. #10
    Utente GNU/Linux
    Registrato il
    10-02
    Località
    Roma
    Messaggi
    3.246
    Prego

    Hai qualcosa collegato alla presa Ethernet (scheda di rete)?

  11. #11
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Nonno Cicala

    Prego

    Hai qualcosa collegato alla presa Ethernet (scheda di rete)?
    Si, il modem ethernet....
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  12. #12
    Utente GNU/Linux
    Registrato il
    10-02
    Località
    Roma
    Messaggi
    3.246
    Moro'79

    Si, il modem ethernet....
    E ti funziona?

  13. #13
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Nonno Cicala

    E ti funziona?
    Beh....si....sono collegato.

    Non c'entra niente il fatto che non è collegato ad un'altro PC??
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

  14. #14
    Utente GNU/Linux
    Registrato il
    10-02
    Località
    Roma
    Messaggi
    3.246
    Moro'79

    Beh....si....sono collegato.

    Non c'entra niente il fatto che non è collegato ad un'altro PC??
    Non dovrebbe, se sai dove mettere le mani (intendo come rimettere le cose a posto all'abbisogno ) forse puoi ottenere l'agognato [ OK ] smanettando nel Centro di Controllo.

  15. #15
    Death Coil
    Registrato il
    06-03
    Messaggi
    2.088
    Nonno Cicala

    Non dovrebbe, se sai dove mettere le mani (intendo come rimettere le cose a posto all'abbisogno ) forse puoi ottenere l'agognato [ OK ] smanettando nel Centro di Controllo.
    Forse ti riferisci alla configurazione modulo ??

    debug .........
    multicast_filter_limit ...........
    media ...........
    full_duplex ..........

    Forse devo inserire quì dei parametri??
    PC Enermax Liberty 620w | Intel® Core™2 Duo E8500 | Asus P5QL-E | 2*2gb Kingston Ddr2 C5 | Asus EAH 4850 1gb ddr3 | WD Raptor 2x WD360ADFD Raid0 | Maxtor 320gb | Samsung 22" | Pinnacle Pctv |

Pag 1 di 2 12 UltimoUltimo

Regole di Scrittura

  • Tu non puoi inviare nuove discussioni
  • Tu non puoi inviare risposte
  • Tu non puoi inviare allegati
  • Tu non puoi modificare i tuoi messaggi
  •