AIUTO!!!
Sono un emerito demente in inglese e non posso usare traduttori online perhè è pieno di termini tecnici e ho assoluto bisogno di sapere cosa c'è scritto qui sotto:
potreste tradurmelo?
pleseeeeeeeeee!!!!!!
il testo è questo:
# Telnet to Router and enter provided username and password
# Then follow these steps to setup port forwards
#
#
# To enter Admin Mode ( will require root password )
#
Type
enable at the prompt
#
# To show currently configured Interfaces ( there could be several )
#
Type
show ip interface at the prompt.
#
# To show Current Port Forwards on Router
Type
show ip nat translations at the prompt.
#
# To Enter Configuation Mode
#
Type
configure at the prompt.
#
# To add Port Forwarding rules modify then type the following commands at the prompt.
# Note: "BVI1" was the found interface name from running command "show ip interface"
#
ip nat inside source static (TCPorUDP) (YourCompsIP) (PortToForward) interface BVI1 (PortToForward)
#
# To forward port 3389 TCP to the computer that had the 172.16.2.60 ip address you would do the following.
#
ip nat inside source static tcp 172.16.2.60 3389 interface BVI1 3389
#
# End Configure Session
#
Press CTRL-Z
#
# Once you have entered the config, test it out and if it works,
# issue this command to make it persistent:
#
copy run start
#
# When it says
#
# Destination filename [startup-config]?
# just press enter.
Grazie in anticipo