Driver video open suse 11.3

[@@mikele90@@]

ho la risolunzione dello schermo a 1366*768 e il refresh a 50 Hz,mentre dovrebbe essere 1440*900 e 60hz di refresh,ma i driver mi sembra siano gli ultimi NVIDIA 256.53
(ho una 9600 GT per portatili),ci sono reposity nn ufficiali per aggiornare i driver?una guida per farlo?

[veleno77]

ma da nvidia-settings non riesci a cambiarlo?
prova a rinominare il file xog.conf in oxrg.conf.old e riavviare senza xorg.conf e vediamo se da solo lo setta in modo adeguato

[@@mikele90@@]

ora ci provo,grazie.
Dalle impostazioni dello schermo ho visto che la risoluzione max arriva a 1366*768,nvidia setting manco l'ho visto

[@@mikele90@@]

nella cartella etc/X11/ trovo solo
Xmodmap Xmodmap.remote xorg.conf.install Xresources
devo modificare xorg.conf.install in xorg.conf.old?

[veleno77]

lancia nvidia-setting da amministratore, prova a cliccare su detect monitor e poi prova a vedere se riesci a cambiare risoluzione, anche se non riesci prova a creare e salvare un file xorg.conf con nvidia-settings poi lo editi e cambi la risoluzione, riavvi e vedi se riesci ad avere la risoluzione che desideravi. se anche così non da risultato, con un xorg.conf nuovo con la tua risoluzione impostata, allora posta il contenuto del file /var/log/Xorg.0.log e vediamo se ci sono particolari errori

[@@mikele90@@]

lancia nvidia-setting da amministratore, prova a cliccare su detect monitor e poi prova a vedere se riesci a cambiare risoluzione, anche se non riesci prova a creare e salvare un file xorg.conf con nvidia-settings poi lo editi e cambi la risoluzione, riavvi e vedi se riesci ad avere la risoluzione che desideravi. se anche così non da risultato, con un xorg.conf nuovo con la tua risoluzione impostata, allora posta il contenuto del file /var/log/Xorg.0.log e vediamo se ci sono particolari errori

ho fatto come hai detto ma nel file che ho creato con nvidia settings nn c'è la possibilità di modificare la risoluzione

Spoiler:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.53 ([email protected]) Fri Aug 27 20:55:01 PDT 2010

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Seiko/Epson"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600M GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

[veleno77]

cambia
Option "metamodes" "nvidia-auto-select +0+0"
in
Option "metamodes" "1440x900 +0+0"

[@@mikele90@@]

ho fatto come hai detto(ho dovuto fare tutto da terminale dato che ci volevano privilegi per agire sulle sottocartelle della radice),creando il file xorg.conf da nvidia setings e mettendoci all'interno

Spoiler:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.53 ([email protected]) Fri Aug 27 20:55:01 PDT 2010

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Seiko/Epson"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9600M GT"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "1449x900 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

però nn cambia niente.
ti posto il contenuto del file Xorg.0.log

Spoiler:

[ 19.460]
X.Org X Server 1.8.0
Release Date: 2010-04-02
[ 20.034] X Protocol Version 11, Revision 0
[ 20.034] Build Operating System: openSUSE SUSE LINUX
[ 20.034] Current Operating System: Linux linux-eg0g 2.6.34.7-0.2-desktop #1 SMP PREEMPT 2010-09-14 14:21:06 +0200 x86_64
[ 20.034] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD3200BEVT-22ZCT0_WD-WXH708670232-part6 resume=/dev/disk/by-id/ata-WDC_WD3200BEVT-22ZCT0_WD-WXH708670232-part5 splash=silent quiet vga=0x314
[ 20.035] Build Date: 19 August 2010 03:34:22PM
[ 20.035]
[ 20.035] Current version of pixman: 0.18.0
[ 20.035] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.035] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.035] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 23 08:23:41 2010
[ 20.035] (==) Using config file: "/etc/X11/xorg.conf"
[ 20.035] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.035] (==) ServerLayout "Layout0"
[ 20.035] (**) |-->Screen "Screen0" (0)
[ 20.035] (**) | |-->Monitor "Monitor0"
[ 20.036] (**) | |-->Device "Device0"
[ 20.036] (**) |-->Input Device "Keyboard0"
[ 20.036] (**) |-->Input Device "Mouse0"
[ 20.036] (**) Option "Xinerama" "0"
[ 20.036] (==) Automatically adding devices
[ 20.036] (==) Automatically enabling devices
[ 20.036] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 20.036] Entry deleted from font path.
[ 20.036] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.036] Entry deleted from font path.
[ 20.036] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 20.036] Entry deleted from font path.
[ 20.036] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/URW/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/
[ 20.036] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 20.036] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 20.036] (WW) Disabling Keyboard0
[ 20.036] (WW) Disabling Mouse0
[ 20.036] (II) Loader magic: 0x7d5ba0
[ 20.036] (II) Module ABI versions:
[ 20.036] X.Org ANSI C Emulation: 0.4
[ 20.036] X.Org Video Driver: 7.0
[ 20.036] X.Org XInput driver : 9.0
[ 20.036] X.Org Server Extension : 3.0
[ 20.041] (--) PCI(0:1:0:0) 10de:0649:1025:015e nVidia Corporation G96 [GeForce 9600M GT] rev 161, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
[ 20.041] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.041] (II) LoadModule: "extmod"
[ 20.586] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 20.586] (II) Module extmod: vendor="X.Org Foundation"
[ 20.586] compiled for 1.8.0, module version = 1.0.0
[ 20.586] Module class: X.Org Server Extension
[ 20.586] ABI class: X.Org Server Extension, version 3.0
[ 20.586] (II) Loading extension MIT-SCREEN-SAVER
[ 20.587] (II) Loading extension XFree86-VidModeExtension
[ 20.587] (II) Loading extension XFree86-DGA
[ 20.587] (II) Loading extension DPMS
[ 20.587] (II) Loading extension XVideo
[ 20.587] (II) Loading extension XVideo-MotionCompensation
[ 20.587] (II) Loading extension X-Resource
[ 20.587] (II) LoadModule: "dbe"
[ 20.588] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 20.588] (II) Module dbe: vendor="X.Org Foundation"
[ 20.588] compiled for 1.8.0, module version = 1.0.0
[ 20.588] Module class: X.Org Server Extension
[ 20.588] ABI class: X.Org Server Extension, version 3.0
[ 20.588] (II) Loading extension DOUBLE-BUFFER
[ 20.588] (II) LoadModule: "glx"
[ 20.589] (II) Loading /usr/lib64/xorg/modules/updates/extensions/libglx.so
[ 20.600] (II) Module glx: vendor="NVIDIA Corporation"
[ 20.600] compiled for 4.0.2, module version = 1.0.0
[ 20.600] Module class: X.Org Server Extension
[ 20.600] (II) NVIDIA GLX Module 256.53 Fri Aug 27 20:50:26 PDT 2010
[ 20.600] (II) Loading extension GLX
[ 20.600] (II) LoadModule: "record"
[ 20.601] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 20.601] (II) Module record: vendor="X.Org Foundation"
[ 20.601] compiled for 1.8.0, module version = 1.13.0
[ 20.601] Module class: X.Org Server Extension
[ 20.601] ABI class: X.Org Server Extension, version 3.0
[ 20.601] (II) Loading extension RECORD
[ 20.601] (II) LoadModule: "dri"
[ 20.601] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 20.601] (II) Module dri: vendor="X.Org Foundation"
[ 20.601] compiled for 1.8.0, module version = 1.0.0
[ 20.601] ABI class: X.Org Server Extension, version 3.0
[ 20.601] (II) Loading extension XFree86-DRI
[ 20.601] (II) LoadModule: "dri2"
[ 20.602] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 20.602] (II) Module dri2: vendor="X.Org Foundation"
[ 20.602] compiled for 1.8.0, module version = 1.2.0
[ 20.602] ABI class: X.Org Server Extension, version 3.0
[ 20.602] (II) Loading extension DRI2
[ 20.602] (II) LoadModule: "nvidia"
[ 20.602] (II) Loading /usr/lib64/xorg/modules/updates/drivers/nvidia_drv.so
[ 20.603] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 20.603] compiled for 4.0.2, module version = 1.0.0
[ 20.603] Module class: X.Org Video Driver
[ 21.250] (II) NVIDIA dlloader X Driver 256.53 Fri Aug 27 20:29:45 PDT 2010
[ 21.250] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 21.250] (++) using VT number 7

[ 21.262] (II) Primary Device is: PCI 01@00:00:0
[ 21.263] (II) Loading sub module "fb"
[ 21.263] (II) LoadModule: "fb"
[ 21.264] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 21.264] (II) Module fb: vendor="X.Org Foundation"
[ 21.264] compiled for 1.8.0, module version = 1.0.0
[ 21.264] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.264] (II) Loading sub module "wfb"
[ 21.264] (II) LoadModule: "wfb"
[ 21.265] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[ 21.265] (II) Module wfb: vendor="X.Org Foundation"
[ 21.265] compiled for 1.8.0, module version = 1.0.0
[ 21.265] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.265] (II) Loading sub module "ramdac"
[ 21.265] (II) LoadModule: "ramdac"
[ 21.265] (II) Module "ramdac" already built-in
[ 21.266] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 21.266] (==) NVIDIA(0): RGB weight 888
[ 21.266] (==) NVIDIA(0): Default visual is TrueColor
[ 21.266] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 21.266] (**) NVIDIA(0): Option "TwinView" "0"
[ 21.266] (**) NVIDIA(0): Option "MetaModes" "1449x900 +0+0"
[ 21.266] (**) NVIDIA(0): Enabling RENDER acceleration
[ 21.266] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 21.266] (II) NVIDIA(0): enabled.
[ 24.667] (II) NVIDIA(0): NVIDIA GPU GeForce 9600M GT (G96) at PCI:1:0:0 (GPU-0)
[ 24.667] (--) NVIDIA(0): Memory: 524288 kBytes
[ 24.667] (--) NVIDIA(0): VideoBIOS: 62.94.3c.00.04
[ 24.667] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.667] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 24.667] (--) NVIDIA(0): Connected display device(s) on GeForce 9600M GT at PCI:1:0:0:
[ 24.667] (--) NVIDIA(0): Seiko/Epson (DFP-0)
[ 24.667] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 24.667] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 25.846] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 25.846] (WW) NVIDIA(0): No valid modes for "1449x900+0+0"; removing.
[ 25.846] (WW) NVIDIA(0):
[ 25.846] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 25.846] (WW) NVIDIA(0): "nvidia-auto-select".
[ 25.846] (WW) NVIDIA(0):
[ 25.846] (II) NVIDIA(0): Validated modes:
[ 25.846] (II) NVIDIA(0): "nvidia-auto-select"
[ 25.846] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 26.909] (--) NVIDIA(0): DPI set to (99, 97); computed from "UseEdidDpi" X config
[ 26.909] (--) NVIDIA(0): option
[ 26.909] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 26.909] (--) Depth 24 pixmap format is 32 bpp
[ 26.909] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 26.911] (II) NVIDIA(0): Initialized GPU GART.
[ 26.921] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 26.921] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 26.921] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 27.605] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 28.469] (II) Loading extension NV-GLX
[ 28.590] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 28.602] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 28.602] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 28.602] (==) NVIDIA(0): Backing store disabled
[ 28.602] (==) NVIDIA(0): Silken mouse enabled
[ 29.374] (**) NVIDIA(0): DPMS enabled
[ 29.374] (II) Loading extension NV-CONTROL
[ 29.374] (II) Loading extension XINERAMA
[ 29.374] (II) Loading sub module "dri2"
[ 29.374] (II) LoadModule: "dri2"
[ 29.375] (II) Reloading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 29.375] (II) NVIDIA(0): [DRI2] Setup complete
[ 29.375] (==) RandR enabled
[ 29.375] (II) Initializing built-in extension Generic Event Extension
[ 29.375] (II) Initializing built-in extension SHAPE
[ 29.375] (II) Initializing built-in extension MIT-SHM
[ 29.375] (II) Initializing built-in extension XInputExtension
[ 29.375] (II) Initializing built-in extension XTEST
[ 29.375] (II) Initializing built-in extension BIG-REQUESTS
[ 29.375] (II) Initializing built-in extension SYNC
[ 29.375] (II) Initializing built-in extension XKEYBOARD
[ 29.375] (II) Initializing built-in extension XC-MISC
[ 29.375] (II) Initializing built-in extension SECURITY
[ 29.375] (II) Initializing built-in extension XINERAMA
[ 29.375] (II) Initializing built-in extension XFIXES
[ 29.375] (II) Initializing built-in extension RENDER
[ 29.375] (II) Initializing built-in extension RANDR
[ 29.375] (II) Initializing built-in extension COMPOSITE
[ 29.375] (II) Initializing built-in extension DAMAGE
[ 29.376] (II) Initializing extension GLX
[ 29.411] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-8AA98D479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 29.422] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 29.422] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.422] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 29.422] (II) LoadModule: "evdev"
[ 29.424] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 29.424] (II) Module evdev: vendor="X.Org Foundation"
[ 29.424] compiled for 1.8.0, module version = 2.4.0
[ 29.424] Module class: X.Org XInput Driver
[ 29.424] ABI class: X.Org XInput driver, version 9.0
[ 29.424] (**) Power Button: always reports core events
[ 29.424] (**) Power Button: Device: "/dev/input/event6"
[ 29.428] (II) Power Button: Found keys
[ 29.428] (II) Power Button: Configuring as keyboard
[ 29.428] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 29.428] (**) Option "xkb_rules" "evdev"
[ 29.428] (**) Option "xkb_model" "evdev"
[ 29.428] (**) Option "xkb_layout" "it"
[ 29.430] (II) XKB: reuse xkmfile /var/lib/xkb/compiled/server-28E5EA52077092D223D2CF00313E190F3B18758C.xkm
[ 29.431] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 29.431] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 29.431] (**) Video Bus: Applying InputClass "LocalKeyboard"
[ 29.431] (**) Video Bus: always reports core events
[ 29.431] (**) Video Bus: Device: "/dev/input/event7"
[ 29.434] (II) Video Bus: Found keys
[ 29.434] (II) Video Bus: Configuring as keyboard
[ 29.434] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 29.434] (**) Option "xkb_rules" "evdev"
[ 29.434] (**) Option "xkb_model" "evdev"
[ 29.434] (**) Option "xkb_layout" "it"
[ 29.435] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 29.435] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 29.435] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 29.435] (**) Power Button: always reports core events
[ 29.435] (**) Power Button: Device: "/dev/input/event4"
[ 29.438] (II) Power Button: Found keys
[ 29.438] (II) Power Button: Configuring as keyboard
[ 29.438] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 29.438] (**) Option "xkb_rules" "evdev"
[ 29.438] (**) Option "xkb_model" "evdev"
[ 29.438] (**) Option "xkb_layout" "it"
[ 29.438] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 29.438] (EE) No input driver/identifier specified (ignoring)
[ 29.438] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 29.438] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 29.438] (**) Sleep Button: Applying InputClass "LocalKeyboard"
[ 29.438] (**) Sleep Button: always reports core events
[ 29.438] (**) Sleep Button: Device: "/dev/input/event5"
[ 29.442] (II) Sleep Button: Found keys
[ 29.442] (II) Sleep Button: Configuring as keyboard
[ 29.442] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 29.442] (**) Option "xkb_rules" "evdev"
[ 29.442] (**) Option "xkb_model" "evdev"
[ 29.442] (**) Option "xkb_layout" "it"
[ 29.444] (II) config/udev: Adding input device Acer Crystal Eye webcam (/dev/input/event9)
[ 29.444] (**) Acer Crystal Eye webcam: Applying InputClass "evdev keyboard catchall"
[ 29.444] (**) Acer Crystal Eye webcam: Applying InputClass "LocalKeyboard"
[ 29.444] (**) Acer Crystal Eye webcam: always reports core events
[ 29.444] (**) Acer Crystal Eye webcam: Device: "/dev/input/event9"
[ 29.447] (II) Acer Crystal Eye webcam: Found keys
[ 29.447] (II) Acer Crystal Eye webcam: Configuring as keyboard
[ 29.447] (II) XINPUT: Adding extended input device "Acer Crystal Eye webcam" (type: KEYBOARD)
[ 29.447] (**) Option "xkb_rules" "evdev"
[ 29.447] (**) Option "xkb_model" "evdev"
[ 29.447] (**) Option "xkb_layout" "it"
[ 29.447] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 29.447] (EE) No input driver/identifier specified (ignoring)
[ 29.449] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/event2)
[ 29.450] (**) Logitech USB Gaming Mouse: Applying InputClass "evdev pointer catchall"
[ 29.450] (**) Logitech USB Gaming Mouse: always reports core events
[ 29.450] (**) Logitech USB Gaming Mouse: Device: "/dev/input/event2"
[ 29.452] (II) Logitech USB Gaming Mouse: Found 20 mouse buttons
[ 29.452] (II) Logitech USB Gaming Mouse: Found scroll wheel(s)
[ 29.452] (II) Logitech USB Gaming Mouse: Found relative axes
[ 29.452] (II) Logitech USB Gaming Mouse: Found x and y relative axes
[ 29.452] (II) Logitech USB Gaming Mouse: Configuring as mouse
[ 29.452] (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5
[ 29.452] (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.452] (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE)
[ 29.452] (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1
[ 29.452] (**) Logitech USB Gaming Mouse: (accel) acceleration profile 0
[ 29.452] (**) Logitech USB Gaming Mouse: (accel) acceleration factor: 2.000
[ 29.452] (**) Logitech USB Gaming Mouse: (accel) acceleration threshold: 4
[ 29.452] (II) Logitech USB Gaming Mouse: initialized for relative axes.
[ 29.452] (II) config/udev: Adding input device Logitech USB Gaming Mouse (/dev/input/mouse1)
[ 29.452] (EE) No input driver/identifier specified (ignoring)
[ 29.455] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 29.455] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 29.455] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 29.455] (**) AT Translated Set 2 keyboard: always reports core events
[ 29.455] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 29.458] (II) AT Translated Set 2 keyboard: Found keys
[ 29.458] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 29.458] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 29.458] (**) Option "xkb_rules" "evdev"
[ 29.458] (**) Option "xkb_model" "evdev"
[ 29.458] (**) Option "xkb_layout" "it"
[ 29.458] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event0)
[ 29.458] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 29.458] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 29.458] (II) LoadModule: "synaptics"
[ 29.459] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 29.459] (II) Module synaptics: vendor="X.Org Foundation"
[ 29.459] compiled for 1.8.0, module version = 1.2.2
[ 29.459] Module class: X.Org XInput Driver
[ 29.459] ABI class: X.Org XInput driver, version 9.0
[ 29.459] (II) Synaptics touchpad driver version 1.2.2
[ 29.619] (--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event0 (waited 0 msec)
[ 29.623] (**) Option "Device" "/dev/input/event0"
[ 29.635] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 29.635] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 29.635] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 29.635] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 29.635] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 29.635] (**) Option "HorizScrollDelta" "0"
[ 29.645] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 29.645] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 29.649] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 29.649] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 29.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 29.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 29.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 29.816] (--) SynPS/2 Synaptics TouchPad auto-dev sets device to /dev/input/event0 (waited 0 msec)
[ 29.820] (**) Option "Device" "/dev/input/event0"
[ 29.828] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 29.828] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 29.828] (EE) No input driver/identifier specified (ignoring)
[ 29.833] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 29.834] (EE) No input driver/identifier specified (ignoring)

quando puoi dagli un'occhiata

[veleno77]

ma in primis la risoluzione 1449x900 non mi pare esista al massimo 1440x900
seconda cosa forse puoi togliere tutti i riferimenti a tastiera e mouse che se ne occupa udev, se hai xorg 1.8 ma questo è un'altro discorso.
altra cosa da terminale prova a dare il comando xrandr

[@@mikele90@@]

risolto,ho installato un'altro nvidia-settings da yast e li c'è il campo della risoluzione dove la posso inserire manualmente

[veleno77]

ah bene allora

[tia85]

risolto,ho installato un'altro nvidia-settings da yast e li c'è il campo della risoluzione dove la posso inserire manualmente

[@@mikele90@@]

credo sia una patch-nn lo so che ha aggiunto quel campo

[FabioFender]

Sinceramente openSUSE 11.3 mi ha deluso parecchio da questo punto di vista, addirittura ero rimasto alla 11.2 perchè non riuscivo a regolare il monitor, poi ho pensato di copiare l'Xorg.conf dalla 11.2 e rimetterlo in una installazione nuova di zecca della 11.3 ... PERFETTO!
Un applauso a quell'idiota che ha deciso di rimuovere sax2 ...